Indesit Washing Machine Drum Not Turning: (9 Tips for Fixing!)

Indesit Washing Machine Drum Not Turning

My Indesit washing machine drum was not turning despite pressing the start button. Initially, I attempted to fix the issue myself by removing it from its housing and jiggling the cord; however neither remedy produced any effect.

Initially, I attempted to fix the issue myself by removing it from its housing and jiggling the cord; however neither remedy produced any effect.

Upon closer inspection, I noticed that one of the plastic clips securing the drum had snapped off – likely due to excessive force being exerted during installation thus necessitating its removal.

Indesit Washing Machine Drum Not Turning:

 First, check the power supply to make sure it is connected and working properly. If the power supply is fine, then you should check the belt that connects the motor to the drum. If the belt is loose or broken, it will need to be replaced. You should also check the motor to make sure it is functioning properly. If the motor is not working, it may need to be replaced.

Why My Indesit Washing Machine Drum Not Turning?

Possible reasons for an Indesit washing machine drum not turning include a faulty motor, a damaged or loose belt, blockage in the drum, or worn-out bearings. Contacting a professional technician is recommended for accurate diagnosis and repair.

What could be causing your Indesit washing machine drum not to turn? A few possibilities include:

An issue with the aforementioned component is the most likely culprit – specifically if it’s not turning at all during operation. Here are some strategies that could assist you in ascertaining why this part of your appliance isn’t functioning as intended:

Do an inspection for any obstructions. Checking for these can be time-consuming, but necessary if there is a stray item on board or even a foreign object stuck within its many crevices; moreover if it is a clever idea to employ an expert in order to guarantee their removal!

To gain access to your washing machine, open its doors and inspect it thoroughly; anything that doesn’t belong inside should be removed without delay!

Open up your appliance and take note of any hoses or wires harnessed alongside the drum. These two components may also require servicing or replacing as they age which could necessitate removing them from their position at times along with access to them.

Indesit Washing Machine Drum Not Turning (9 Tips for Fixing!)

1. Check the power supply to the washing machine. Make sure the power cord is securely plugged into the wall outlet and the machine is turned on.

2. Check the door latch to make sure it is securely closed.

3. Check the water supply to the washing machine. Make sure the water supply is turned on and the hoses are securely connected.

4. Check the filter for any blockages.

5. Check the belt for any signs of wear or damage.

6. Check the motor for any signs of damage or wear.

7. Check the drum for any signs of damage or wear.

8. Check the control board for any signs of damage or wear.

9. If all of the above steps have been completed and the drum still does not turn, contact a qualified technician for further assistance.

What To Do If Your Washing Machine’s Drum Not Turning?

If your appliance is not turning, check its drum to ascertain whether it’s in the correct position.

Maximizing its contact with water can prevent some models from working optimally when they’re supposed to be operating!

If you discern that the drum is indeed in place, inspect the seal to ensure that it is without defect. If there are any cracks or holes, don’t hesitate to replace it – this provides an effective measure of protection against any leaks as well as ensuring optimal functionality.

1. Drive belt:

If your Indesit washing machine drum is not turning, it is likely due to a worn drive belt. Before you attempt a repair, you should troubleshoot the issue to determine the cause. First, unplug the machine from the power supply and remove the back panel.

Take a look at the drive belt and check for any signs of wear or damage. If the belt is cracked, frayed or broken, it needs to be replaced. You can easily find a replacement belt online or in many hardware stores.

Once you have the new drive belt, you’ll need to install it correctly. Start by removing the old drive belt and then fit the new one around the motor pulley and tensioner pulley.

Finally, adjust the tension of the new belt to ensure it spins properly. With these steps, you can successfully replace a worn drive belt and get your Indesit washing machine drum turning again.

2. Check If You Have The Right Cycle For The Machine

If you own an Indesit washing machine, you may find that the drum isn’t turning. This could be due to a number of causes, but one of the most common is that the drum isn’t compatible with the machine.

Before attempting any repairs, it’s important to check if you have the right cycle for your machine. To do this, first unplug the appliance from the power supply and remove the top panel.

Look for a label on the back of the drum which will indicate the type of cycle it is designed for. If it doesn’t match the cycle indicated in your machine’s user manual, then it won’t be compatible.

You will need to get a new drum to ensure your washing machine runs correctly. If you’re unsure which cycle is required, contact the customer support team at Indesit for assistance.

Once you have the correct drum installed, you can then start troubleshooting any other issues that may be causing your machine not to turn.

3. Determining If It’s A Drain Issue

If the drum isn’t turning, but no leaks are evident, then it’s likely that there is a problem with your drain hose. If this is the case, try switching hoses – if still unsuccessful; you may require professional assistance!

If your drainage tube is out of alignment or is not adequately sealing the coupling at its junction point with the machine’s main casing, then water can accumulate in the drum and freezer compartment.

This could lead to ice buildup within these areas – resulting in subsequent issues with rinsing and draining the washer before it can be used again.

4. Determining If It’s A Timer Issue

If your Indesit washing machine is experiencing a problem with its drum rotating, then the culprit could be an issue with the timer.

If you notice that the washing machine’s indicator light goes off when the cycle finishes, don’t rush out and switch it on again – as doing so may just cause it to start over!

Instead, allow time for all of the moisture in your laundry to evaporate before proceeding with any further operations.

The average 60-minute timer should suffice for most loads.

5. Testing The Water Pressure

Indesit Washing Machine Drum Not Turning

If you are having trouble with your Indesit washing machine, it’s important to first test the water pressure. Low water pressure can cause the drum to not turn properly, leading to a malfunctioning machine.

To check your water pressure, you will need a water pressure gauge. This device can be found at most hardware stores and online.

Once you have the gauge, disconnect any hoses from the washing machine and attach the gauge to the end of the hose.

Make sure all other faucets in your home are closed so that the pressure is isolated to your washing machine.

Turn on the tap and watch the gauge; it should read at least 20 psi. Any lower and you may have a problem with your water pressure.

If this is the case, you will need to contact your local plumber to fix the issue. With proper water pressure, your Indesit washing machine should be able to turn its drum properly, ensuring that your clothes are cleaned correctly.

6. Clearing The Hoses And Valves

If the hose or valve is damaged, you can utilize an air compressor to blow out any entrapped water from inside.

If this does not resolve your issue then it may be necessary for professionals to intervene in order to assess and rectify any issues with your machine!

Ensure that all connections between hoses and valves appear snugly secured. Since these components are frequently subject to a lot of hard use; ensuring there is no leakage cannot be overlooked!

7. Fitting An Additional Lint Filter Or Cleaning And Maintenance

If the lint filter or sanitiser pad is not sufficient to get rid of all debris, it may be prudent to apply another layer.

Ensure that your machine’s soap dispenser is properly open before adding detergent – this will ensure maximum cleaning power!

On occasion, you may have to give your appliance a good scrub. If its interior appears grimy, it could indicate that it’s time for some thorough maintenance!

8. Check The Lint Filter

If your washing machine ceases to rotate while the drum is engaged, this could be an indication of a clogged lint filter.

This can happen if there are excessive fibers or debris build-up within its confines. To rectify this problem all that’s required is removing and cleaning the filter before reassembling – simple!

If you’re fortunate enough to experience difficulties with your Indesit washing machine’s start-stop cycle, don’t be alarmed: simply consult our guide for assistance on troubleshooting these issues.

9. Due to an Unbalanced Load

If you have noticed that the drum of your Indesit washing machine is not turning, then the issue could be due to an unbalanced load.

This is a common problem that many people experience, and it’s important to take the necessary steps to fix it. To begin, try redistributing the items in the drum so that they are evenly spread out.

Once this is done, make sure to select a lower spin speed and try running the cycle again. If your machine’s drum still does not spin, you may need to check for any blockages or broken parts.

If you find any, then it is best to contact a professional for assistance. Additionally, if you are using an older model of Indesit washing machine, you should ensure that it is not overloaded with too many items.

By taking these precautions, you can reduce the chances of experiencing an unbalanced load issue with your washing machine and keep it running smoothly.


To ascertain whether or not your Indesit washing machine is malfunctioning, simply unplug it from its power socket and take a look at its drum unit.

If its surface is visibly warped or deformed in any other manner, then this could be an indication that something is amiss with regards to this appliance; perhaps it needs replacing?

If you are encountering a laundry issue that is preventing the entire drum from turning, then there are several feasible solutions at hand.

The first step would be to check if it’s possible to adjust the speed of your machine; alternatively, you could also try adjusting the temperature settings to see if this alleviates any difficulty when it comes to doing laundry.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *