Kenmore Coldspot Ice Maker Not Working? (REVEALED)

Kenmore Coldspot Ice Maker Not Working?

Are you having trouble with your Kenmore coldspot ice maker?

Don’t worry, you’re in the right place. In this article, we will discuss some potential fixes for your malfunctioning ice maker so that you can get back to enjoying all of those delicious frozen treats!

Kenmore Coldspot Ice Maker Not Working:

If your Kenmore Coldspot ice maker is not working, first check to make sure it is plugged in and that the power connection is secure. If this does not resolve the issue, then you may need to troubleshoot further. First try resetting the unit by unplugging it for 30 seconds and plugging it back in. If this still doesn’t work, you can access the service manual online from Sears Parts Direct which will provide step-by-step instructions on how to diagnose and repair potential problems with your specific model of ice maker.

5 Common Kenmore Coldspot Ice Maker Issues:

Kenmore Coldspot ice makers are high-performance appliances that provide many benefits to homeowners, but sometimes they experience technical issues. Here are five common Kenmore Coldspot Ice Maker Issues:

1. Water Supply Line Blockage –

The water supply line for the ice maker may become blocked, preventing it from getting the necessary amount of water and making ice.

This can be due to a clog in the line or mineral buildup within it. To resolve this issue, you should check your water lines and clean them as needed.

2. Faulty Thermostat –

The thermostat controls how cold the interior of your freezer is and if it’s not working properly, then your ice maker won’t make any ice either.

If this is the case, then you will need to replace the thermostat with a new one that matches the specifications of your model number for best results.

3. Incorrect Setting –

It’s possible that you haven’t set up your machine correctly in order for it to produce enough ice or at all!

Make sure that all settings on both your refrigerator and freezer are configured appropriately so that they work together optimally in order to keep temperatures low enough inside your fridge/freezer combo unit at all times which helps create more consistent amounts of perfect cubes every time!

4) Clogged Drain Hose –

The drain hose connected to an icemaker can often get clogged with debris over time which prevents proper drainage when melting down cubes made by its cycle process.

This leads directly towards malfunctioning altogether since there isn’t any place left where excess fluids could go after thawing out frozen bits into liquid form again eventually leading back up into tank itself if unchecked long enough!

A quick fix would involve unclogging said tube manually using some type of tool like pliers or wire brushes before running fresh batches through once more afterwards each day until things start functioning normally again like usual!

5) Damaged Ice Tray Parts –

Overuse or wear-and-tear can cause damage to important components inside an icemaker such as its tray parts; meaning things like auger blades might break off from their joints due frequent usage resulting decreased performance levels when trying turn small chunks solids back liquid state quickly before refreezing them again into cube shapes shortly thereafter afterwards (or vice versa).

In these situations replacing damaged pieces becomes necessary lest no further progress could happen anymore regardless how much effort put forth try repair existing ones yourself instead buying brand new units outright anyway unfortunately too late already by point anyways most likely speaking here…

Common Symptoms of Malfunctioning Ice Makers:

The Kenmore Coldspot Ice Maker is a reliable, long-lasting machine that can provide plenty of fresh ice for many years.

Unfortunately, like all appliances and machines, an ice maker can malfunction from time to time – but it’s important to identify the signs so you can get it fixed quickly.

Common symptoms of a malfunctioning Kenmore Coldspot Ice Maker include:

1) Not producing enough or any ice:

If your machine isn’t producing enough or any ice at all then it could be due to a number of things such as clogged filters or low water pressure.

This should be addressed as soon as possible in order to prevent further damage and potential loss of money on wasted energy bills.

2) Producing too much ice:

It’s also possible for an ice maker to produce too much which may indicate that there is something wrong with the temperature settings or other components inside the machine.

This should not be ignored because if left unchecked this could lead to serious problems down the line including costly repairs and replacements.

3) Extra noise coming from the unit:

Excessive noises such as clanging, rattling or grinding sounds are never good signs when dealing with any kind of appliance and could indicate that there is something seriously wrong with your Kenmore Coldspot Ice Maker which needs immediate attention from professionals before more damage is done.

Diagnosing and Troubleshooting the Problem:

Diagnosing and troubleshooting a Kenmore Coldspot ice maker when it is not working can be done in several steps.

Power supply:

The first step should be to ensure that the power supply is functioning correctly.

Check for any tripped circuit breakers or blown fuses, and make sure the plug is securely connected to an outlet with active power.

Inspect the water:

Next, inspect the water line connection to make sure there are no kinks or blockages in the tubing, as this could cause a lack of water flow into the unit.

If everything looks like it’s connected properly, check whether or not you can hear any motor noise coming from inside your freezer – if you do not hear anything at all then likely your ice maker needs repair work.

If you have checked these basic components but still cannot find what is wrong with your Kenmore Coldspot ice maker, it may take further investigation to discover exactly which component has failed and requires replacement or repair service.

Professional assistance may be required if more intricate parts of your appliance require attention such as wiring connections within the unit itself.

Steps for Cleaning a Clogged or Frozen Ice Maker

Step by step:

1. Unplug the ice maker from the power source.
2. Remove the ice bin and any ice cubes that may be stuck in the ice maker.
3. Check the water line for any kinks or blockages.
4. Clean the ice maker with a damp cloth and a mild detergent.
5. Use a vacuum cleaner to remove any dirt or debris from the ice maker.
6. Check the water inlet valve for any blockages or clogs.
7. Replace the water filter if necessary.
8. Check the ice maker for any signs of wear or damage.
9. Clean the ice maker’s evaporator plate with a soft brush.
10. Pour a mixture of white vinegar and water into the ice maker and let it sit for 30 minutes.
11. Empty the vinegar and water mixture and rinse the ice maker with clean water.
12. Reconnect the power source and turn on the ice maker.
13. Allow the ice maker to run for several minutes to ensure it is working properly.
14. Replace the ice bin and enjoy your freshly cleaned ice maker.

Replacing a Damaged/Defective Ice Maker Part:

Replacing a damaged or defective ice maker part is often the solution if your Kenmore coldspot ice maker isn’t working.

You should first confirm that the appliance is plugged in and has power, including checking for any blown fuses or tripped circuit breakers.

If all power related items are operating correctly, you may have to replace an internal part.

Start by opening the top of your Kenmore Coldspot ice maker and visually inspect each component for signs of damage such as corrosion, rusting wires, melting plastic parts, loose screws etc.

If you find a broken item then it needs to be replaced with an exact match from the manufacturer’s website or other online retailers; using non-OEM components can void your warranty and cause further issues down the line.

If you aren’t sure what specific part needs replacing then get advice from an experienced technician before buying anything – they will be able to quickly identify which piece requires repair/replacement via photos or videos sent over email/text message.

Once everything is determined, purchase a replacement part (ensuring it matches exactly) and follow installation instructions carefully – mistakes here can lead to even more problems so take care!

Resetting the Refrigerator Control Panel:

Resetting the Refrigerator Control Panel is an important step that should be taken if your Kenmore coldspot ice maker isn’t working.

The control panel may need to be reset in order to properly regulate the temperature settings and adjust for any other changes made inside the refrigerator.

Resetting it will also help to ensure that all of your settings are saved, so you won’t have to re-enter them every time you open the door.

To reset your control panel, start by unplugging the refrigerator from its power source or turning off the breaker switch at your circuit box.

Wait 10 seconds before plugging it back in or flipping on the breaker switch again. Once plugged back in and powered on, access and check all of your settings.

Make sure they are set as desired and hit “Save” if necessary (some models may require this).

Your Kenmore coldspot ice maker should now begin functioning correctly after a few minutes once temperatures have been adjusted appropriately according to manufacturer instructions found with each new model refrigerator or online via their website support page.

Kenmore coldspot model 106 ice maker not making ice:

If you own a Kenmore Coldspot model 106 ice maker and it’s not making ice, don’t worry – there are several potential solutions.

Switch controlling the power:

First, make sure the switch controlling the power to the unit is in the “on” position; if it isn’t, flip it on and wait for the machine to start producing cubes.

Additionally, check to ensure that your water supply line is securely connected and free of obstructions that could impede its performance.

If this doesn’t solve your problem, inspect both sediment filter screens (located near where the water lines enter) to make sure they aren’t clogged with debris or dirt particles.

Clogged filters can restrict water flow and prevent proper operation of your ice maker; once clean, replace them back into their original positions.

Freezer temperature:

Another issue could be that your freezer temperature may be set too low which delays or prevents automatic defrosting cycles from occurring regularly – these cycles help keep your ice maker functioning correctly by melting away build-up caused by frost accumulation on evaporator coils.

To resolve this issue adjust settings so that temperatures read between 0°F (-18 °C)and 8°F (-13 °C). Lastly consider replacing any worn out parts such as an old self-piercing saddle valve which might be preventing adequate amounts of water from flowing through necessary components inside the unit.:

Why did my kenmore ice maker stop working?

Kenmore coldspot ice makers are popular appliances in many households. Unfortunately, they can sometimes stop working due to a variety of reasons.

One common cause is that the water line may be frozen or blocked.

This often happens when the temperature outside drops and can prevent water from flowing into the unit properly.

It’s important to check this before investigating further as it’s relatively easy to fix if this is causing an issue with your Kenmore coldspot ice maker not working.

Another possible reason why your Kenmore ice maker may have stopped working could be due to mineral deposits clogging up vital components inside the unit.

This build-up over time will reduce flow rate, making it difficult for it to produce enough ice for use in drinks or other refreshments.

If you suspect this might be causing problems, using a specialist cleaner designed specifically for cleaning out appliance parts should help clear any blockages and restore functionality of the Kenmore coldspot ice maker machine again.

Finally, another potential reason why your Kenmore coldspot ice maker isn’t producing enough cubes could be caused by faulty electrical components within its circuitry board leading directly to malfunctioning sensors or switches which control how much power goes through different sections of its system resulting in insufficient cooling capacity needed by the production cycle of its mechanism.

Taking apart and inspecting these components carefully one at a time helps identify where any issues lie so they can repair them quickly and easily without having to replace expensive equipment unnecessarily – always ensuring you get best value out of every repair job performed on your household appliances!

How do you unfreeze a kenmore ice maker?

If the Kenmore Coldspot ice maker isn’t working, it may be frozen.

Ice makers can freeze up if the water filter is clogged or if there’s a leak in the supply line causing low pressure.

Fortunately, unfreezing an ice maker is relatively simple and involves just a few steps.

Start by checking for any blockages in the water filter.

If you find one, replace it immediately with a new filter. This will ensure that adequate water pressure reaches the ice maker and avoid future freezing issues.

Next, turn off power to your refrigerator from its circuit breaker or unplugging it from its power source before attempting to repair anything inside of it.

Then inspect all connections for signs of leaking including at both ends of your supply line as well as where they connect to your refrigerator and wall outlet (if applicable).

Tighten any loose fittings to prevent leaks from occurring again in a timely manner.

If you locate a broken part such as an elbow joint or valve body, these also need to be replaced ASAP so that proper functioning can resume quickly .

Lastly , switch on the power back to your fridge , allowing enough time for everything connected back together properly before using again .


In conclusion, if your Kenmore Coldspot Ice Maker is not working, there are a few things you can do to try and fix the issue.

First, check the power source and make sure it is plugged in and receiving power.

If it is, then check the water supply line to make sure it is connected and not blocked. If the water supply line is connected and not blocked, then check the ice maker itself for any signs of damage or malfunction.

If the ice maker appears to be in working order, then you may need to replace the ice maker itself.

If you are unable to fix the issue yourself, then it is best to contact a professional to help you diagnose and repair the issue.

With the right knowledge and tools, you can get your Kenmore Coldspot Ice Maker working again in no time.

Similar Posts


  1. Полностью стильные новинки мировых подиумов.
    Исчерпывающие новости самых влиятельных подуимов.
    Модные дома, бренды, высокая мода.
    Новое место для модных хайпбистов.

  2. Наиболее стильные события индустрии.
    Исчерпывающие события лучших подуимов.
    Модные дома, бренды, высокая мода.
    Приятное место для модных людей.

  3. Несомненно стильные новости мира fashion.
    Все мероприятия мировых подуимов.
    Модные дома, торговые марки, haute couture.
    Лучшее место для стильныех хайпбистов.

Leave a Reply

Your email address will not be published. Required fields are marked *